To verify power on a VergeSense gateway:
Confirm gateway PoE injector is plugged into an outlet. The PoE injector should have a visible BLUE light.
Verify Power icon has a visible green light
To verify power on a wired PoE sensor:
Visually verify if the sensor has a solid red light on the side
Visually verify port powering sensor has visible LED lights.
If a sensor has a rapid blinking red light, please replace the sensor with a new one.
To verify power on a wireless battery sensor:
Turn the sensor OFF
Wait 30 seconds
Turn the sensor ON
Visually identify a fast-blinking red light
If the red light DOES NOT blink, check the battery status. Also, make sure batteries and mount plate are securely fastened.
