2. Use the Building Selector to navigate to your property, and then select the meter you would like to enter meter readings for.
​

3. Select the "Readings" tab

4. Select "Add Reading"

5. Enter the date, time, and display value of your meter. For electric meters, enter the kWh value. For water, enter Gallons or CCF, and for gas enter BTU/CCF. If you would like you can also add an image of your reading. Then select "Save".

6. Wait for a day or two, and then enter another manual reading for the same meter. For meters with very low consumption, you may need to wait for up to a week to ensure we have enough consumption recorded to make an accurate comparison

7. Once you have two readings, compare the readings by selecting the first reading for the "Start Reading" and selecting the second reading as the "End Reading" and selecting "Calculate"
​

8. Send an email to delivery@aquicore.com or your Project Engineer letting them know that the manual readings for your building are entered. (Don't forget to include the name of your property in your email!)